Set up is easy!
1. Insert the Wovenaire® core inside the bottom of the bed cover and zip it closed.
2. Carefully open the reusable vacuum pack bag to remove 4 bolsters.
3. Toss the bolsters in the dryer for 15 minutes to help them expand. Hand fluff as needed.
4. Insert one long bolster into the back bolster sleeve by sliding it in one opening and pulling it from the other sleeve end.
5. Zip halfway around each side to form sleeves to tuck one short bolster into each side.
6. Continue zipping each side around the front corners, then tuck the last long bolster before zipping fully closed.